Hi Guy's,
since last release 1.10.28 i have some strange gps problems.
It happens 3 times, that the gps is gone, which is not unusual. But then the display switched between "00" for satelites to "zZ" and vice versa.
Then it switched from "00" to for example to "05" updates the postition on the map and switched immediately back to "zZ".
When I switched off the watch and on again, it were back to normal. 2 times it happens after a break, i have on "Auto Pause".
You can see where I did the breaks on the track, it looks like the watch doesn't recognised it.
Here are some examples:
http://www.endomondo.com/workouts/361560882/8937188 -> see the points at the end of track.
after stop - switched on and off again:
http://www.endomondo.com/workouts/361560995/8937188
next day same again:
http://www.endomondo.com/workouts/361561097/8937188 -> see the points at the end of track and you can see where i did the break
after stop - switched on and off again
http://www.endomondo.com/workouts/361561175/8937188
Could you please have a look at this or is it expected behavior?
Regards Gerhard