15-10-2013 Software release version 1.7.14

15-10-2013 Software release version 1.7.14

Postby admin » Tue Oct 15, 2013 2:16 pm

A new software update is now available!

This software release is focused on two main areas:

Improving the stability of your Leikr watch
Delivering a new Maps Editor
Improving the stability of your watch:

Recently we have seen few of the Leikr members experiencing recoverable issues with file system.
With this release we have hopefully solved the problem and the watch should no longer go into a corrupted state.

Maps editor:

The new maps editor allows the users to select specific areas from a map and determine which maps to upload to the watch.
The users can therefore combine different areas and create their own package.
Available areas are: most of Europe, North America and Australia.

Along with it, we also fixed a bug in the workout editor: we can now create workouts with two subsequent steps based on time duration.

We are looking forward to your feedback on the usability of our new features!

Thanks
The Leikr Team
admin
Site Admin
 
Posts: 641
Joined: Wed May 29, 2013 4:42 pm

Re: 15-10-2013 Software release version 1.7.14

Postby mkronby » Wed Oct 16, 2013 5:47 pm

Hi
I have made a workout and tried to download to my watch. That worked perfect. Some feedback on the workout editor. Easy to work with on the computer but it would be nice if you could see where you are in your workout on the watch. It shows only for a few seconds when you are going to next step in your workout.
An idea could be that you can see a "countdown" on the screen, meaning that you can how far you are in the program. Could also be a counting up, so you can follow how much you are missing before next step.
Best regards

Michael
mkronby
 
Posts: 10
Joined: Mon Jul 01, 2013 3:58 pm

Re: 15-10-2013 Software release version 1.7.14

Postby inlineskaterdanny » Wed Oct 16, 2013 7:39 pm

I'm really impressed with the map editor and I like it very much. It worked perfectly for me. Thank you!
inlineskaterdanny
 
Posts: 26
Joined: Tue Sep 24, 2013 10:14 am

Re: 15-10-2013 Software release version 1.7.14

Postby ebowlen » Thu Oct 17, 2013 4:51 am

Problem with rhis update. GPS is gone! Leikr does not try to get GPS signal. What can I do? Thamks.
ebowlen
 
Posts: 6
Joined: Sat Aug 10, 2013 9:45 am

Re: 15-10-2013 Software release version 1.7.14

Postby admin » Thu Oct 17, 2013 10:19 pm

@Michael: if you long press "step" in a workout you can see the step you are currently doing. A countdown could be interesting.
@Edward: I believe Peter got in contact with you today. Your problem should be solved by now.
@Danny: thanks!
admin
Site Admin
 
Posts: 641
Joined: Wed May 29, 2013 4:42 pm

Re: 15-10-2013 Software release version 1.7.14

Postby ebowlen » Fri Oct 18, 2013 4:32 am

Problem solved!
ebowlen
 
Posts: 6
Joined: Sat Aug 10, 2013 9:45 am

Re: 15-10-2013 Software release version 1.7.14

Postby mkronby » Fri Oct 18, 2013 1:08 pm

Hi
I have been trying to use the workout editor. Still easy to make the steps but when running, I had a bad experience today. I was suppose to warm up for 8 min and the do a 3 k run with a pace between 5:21 & 5:29 and the a 8 in cooldown.
The first 8 min went well (Info on the Watch was 1.52 km done in 8 min) then I started on my 3 k but when the Watch has registrated 3 k in total, it starts my 8 min cooldown. Så my 3 k steady run was only 1.48 k.
The puls was also a little strange. Before my run is says between 180 and 200 bpm (A Little high :D ) when I did my last run up a hill is says 56 bpm :mrgreen: which will be really good. But it was not working and a have tried after my run to see if it was the puls belt but it seems to Work fine with my Garmin.
mkronby
 
Posts: 10
Joined: Mon Jul 01, 2013 3:58 pm

Re: 15-10-2013 Software release version 1.7.14

Postby admin » Sat Oct 19, 2013 4:03 pm

Hi mkronby,
thanks for the valuable feedback. We will look into the problem and and fix it.

Regarding pulse: This is the first time we hear that the pulse is not reported correctly (but there is always the first time for everything).
what pulse belt do you use?
is it the only belt you have connected?
can it have low battery?

thanks for helping!
Cris
admin
Site Admin
 
Posts: 641
Joined: Wed May 29, 2013 4:42 pm

Re: 15-10-2013 Software release version 1.7.14

Postby mkronby » Mon Oct 21, 2013 10:18 am

Hi Cris.

I'm using a Garmin ANT+ belt (From my XT910).
Yes, only belt connected and as said it worked fine on my Gramin after my training when I tested it to see if it got the same problem.
Michael
mkronby
 
Posts: 10
Joined: Mon Jul 01, 2013 3:58 pm

Re: 15-10-2013 Software release version 1.7.14

Postby admin » Mon Oct 28, 2013 7:41 am

Hi Michael,
that explains
thanks
Cris
admin
Site Admin
 
Posts: 641
Joined: Wed May 29, 2013 4:42 pm


Return to Software releases

Who is online

Users browsing this forum: No registered users and 1 guest